Product Attribute |
|
Model Number : 908S |
Input Voltagle : 220V |
Output Temperature : 180〜500℃ |
Temperature Stability : -- |
Output Power : 80W |
Dimensions : -- |
Features:
Voltage: AC220-240V or AC100-130V
Power: 80W
Frequency: 50Hz / 60Hz
Temperature range: 180 ~ 500 ° C
/ 356 ~ 932 ° F
Temperature stability: ± 5 ℃
Heating type: Wmore ceramic
element
Tip: 900M-B1.2
Cable length: 1.4m / 55.12in
Features:
Heat dissipation designed handle will not be too hot to
hold for a long time use, handle tail wire design is safer to use
Plug type heating core is more
convenient to use and replace
LCD display makes the temperature
reading clear at a glance
PCB are plated in both sides for
stable performance and security
High technology programming chip,
digital calculating constant current function, internal programming temperature
correction function for zero error of required temperature.is a great tool for
electronics, computer equipment, watch repair and other craft projects
Instruction:
Press the (+) button once to
increase 1℃; press and hold it to increase
temperature continuously.
Press the (-) button once to
reduce 1℃; press and hold it to reduce
temperature continuously.
The newly set temperature will be
saved after 3 seconds,and will keep
the temperature for next time
powering-on.When (℉) or (℃) symbol
flashes, it means the heating
core has not reached the set temperature.
Temperature Calibration:
1.After 60 seconds of power on,
put the soldering tip on a thermometer,
and a moderate amount of solder
on the soldering tip; make the test
point and the soldering tip have
good touch.
2.When thermometer displays a
stable temperature (about 2 seconds),
write down the temperature.
3.Move soldering iron away from
thermometer;
press the (-) and (+)
button at the same time to enter
temperature Calibration.
4.Input adjustment quantity.
Adjustment quantity=set
temperature - measured
temperature (see example)
5.Press the (-) and (+) at
the same time to exit
temperature interface, finished.
Example 1, when setting
temperature is 350℃ while
measured temperature is 342℃, the
correction steps
are as follows:
a.press the (-) and (+) at
the same time to enter
temperature correction interface.
b.press the "+" button
till the LCD displays 8℃
c.press the (-) and (+) at
the same time to exit
temperature correction interface
Example 2, when setting
temperature is 350℃ while
measured temperature is
330℃,the correction steps
are as follows:
a.press the (-) and (+)
at the same time to enter
temperature correction
interface.
b.press the (-) button till
the LCD displays -20℃
c.press the (-) and (+)
at the same time to exit
temperature correction
interface
Parameter setting:
1.To press the red and white
button both at
the same time before it is power
on, power
on,after the LCD is working,stop
to press the
button, you will enter the
setting menu.The
LCD shows (F) or (C)
2.Press the white button to
choose C(degree
centigrade) or
F(Fahrenheit).Press the Red
button to choose Element
U20(JCD01),U20(JC
D02),U30(JCD03),U40(JCD04).
3.Pressing the (-) and (+)
at the same time
to save your setting operation
and quit the
setting menu(finished)
To protect the user from scald,
when on the
setting menu, it will stop
heating.
Failure warning indication
The LCD shows (OP): the heating
element is open circuit.
Solution:1.change the
element.2.To confirm that whether
the pin of element is oxidized.
The LCD shows(E1):The outlet is
poor contact,or thebattery
source interfering the soldering
iron that it is power down.
Solution:1.Unplug the soldering
iron.2.Close the interfering
source. 3.To use it far away from
the interfering source.
Note:
Please do not touch the soldering
tip and tube when the power is turn-on
Packaging Details
- Unit
Type:piece
- Package
Weight:0.123kg (0.271lb)
- Package
Size:29cm x 15cm x 5cm (11.42in x 5.91in x 1.97in)
Packing List
1 * 908S 80W
Racdde 908S Digital Display 80W Soldering Iron Temperature Adjustable Welding Kit AC110V-130V 220V-240V - CN Plug
- Product Code: YW3957
- Availability: In Stock
-
$22.64
- Ex Tax: $22.64