Product Attribute |
|
Type : Carving
Chisel |
DIY Supplies : Woodworking |
Model Number : - |
Use : Carving |
is_customized : Yes |
Blade Material : Iron-nickel
Alloy |
Handle Shape : Round |
Feature:
Professional carving knife chapter.
Applies generally less hard wood material.
Strong and durable tipped tools.
These tools are great for doing detail work on
the smaller wood lathes and hobby.
Assorted steel blades with pine wood handles.
These are perfect for beginners or even
experienced wood carvers.
Ideal for carpenters, wood turners, hobbyists,
etc.
Specification:
Type: Wood Carving Knife
Color: As the picture shown
Material: Wood Handle+ Steel
With A plastic box.
6 Set to choose:
Length: App 14.3cm
Note:
Using hand tools can be dangerous, you’d better
always take care, and keep away from children.
Wear protective eye wear in work are at all
times. Select correct type and size handtool for work.
Due to the light and screen difference, the
item's color may be slightly different from the pictures.
Please allow 0.5-2
cm differences due to manual measurement.
[Introduction of
the type and usage of carving knife]
Round knife: The cutting edge has a circular arc shape, which is mostly used
for round and round dents. It is also very useful for carving traditional
flowers. For example, the round faces of flowers, petals and flower branches
need to be shaped with a circular knife. The round knife is more labor-saving
and can adapt to large fluctuations and small changes. Moreover, the line of
the round knife is not certain, it is flexible and easy to explore. Depending
on the application, the size of the round knife should be different, ranging
from 5 cm to 0.5 cm. The two corners of the knife-shaped figure should be ground
and rounded, otherwise the carving pattern or other dents will not only push
but also damage the sides of the dent. If you are doing embossing, you should
keep the two corners of the knife edge and use the function of the corner to
engrave the corner of the corner. Therefore, you need to equip two kinds. There
is also a round knife. The bevel is in the groove, and the back of the knife is
straight. It is a round knife. It is deeper in wood and suitable for round
carving, especially in the blanking and roughing stage. The slope is on the
back of the knife, and the straight inside is a round knife. The wood is deeper
and can be used for gentle walking or ticking. It is more useful in relief. The
shape of the round knife can also be made into a curved shape of the iron rod
as needed to extend into the deeper part to dig the hole.
Flat Knife: The cutting edge is straight, which is mainly used to slash the
surface of the shovel flat wood to make it smooth and seamless. Large models
can also be used to cut large, blocky, and use the method, such as the
brushstroke effect of painting, it is strong, vivid and natural. The sharp
angle of the flat knife can be scribed, and the knife foot or the imprint
pattern can be removed when the two knives intersect. Wood carving figures from
Sweden and the Soviet Union use flat knives and have a strong woody knife.
Oblique knife: The edge of the knife is about 45 degrees, which is mainly used
for the corners of the joints of the work and the slits of the hollow for the
chamfering. If you engrave the corner of the character, the oblique knife is
easy to use. The knife is divided into a forehand and a backhand to suit each
direction. In the boxwood carvings of Shanghai, the hair crepe is usually cut
with a diagonal knife, and the knife is used to transport the knife. The hair
effect is more vivid and natural than that with a triangular knife.
Jade knife: commonly known as "the monk head", "butterfly
chisel", the cutting edge is a circular arc shape, is a kind of
light-cutting knife between the round knife and the flat knife, divided into
two types: arc and oblique arc. They can be replaced when the flat and round
knives cannot be used. The feature is more moderate, neither as straight as a
flat knife, nor as deep as a round knife, suitable for use on concave
undulations.
Medium steel knife: The blade has a slope on both sides. Also known as
"printing knife." The traditional engraving believes that the middle
steel blade is in the middle of the blade, and it can be used to keep the front
straight and keep the surrounding parts free from vibration. The medium steel
knife is also used to imprint the pattern patterns on the costumes and props.
Triangle knife: The cutting edge is triangular, because its front is on the
left and right sides, and the sharp points are on the middle corner. To make a
triangular knife, use the applicable tool steel (usually 4-6 mm round steel),
mill a 55-60 degree triangular groove, smooth the two waists, and grind the
mouth end into a cutting edge. The angle is large, the carved lines are thick,
and vice versa. The triangular knife is mainly used to engrave the decorative
lines of hair. It is also a commonly used tool for engraving and watermark
woodcut art. When operating, the triangular tip is pushed on the board, the
wood chips are spit out from the triangular groove, and the triangle tip is
pushed over. Then draw the lines.
12-pack internal knives details:
1 triangle knife width 5.7mm
1 round head knife width 7.1mm
1 pointed knife width 7.7mm
1 oblique bending knife width 6.0mm
1 small flat knife width 5.1mm
1 large flat knife width 6.9mm
1 right oblique knife width 3.0mm
1 left oblique knife width 5.5mm
1 right oblique knife width 7.0mm
1 small semi-circular arc knife width 4.5mm
1 middle and half arc knife width 6.6mm
1 large semi-circular knife width 8.5mm
Racdde 12PCS Set Woodworking Chisel Set Craftsman Wood Carving Tools
- Product Code: YW4080
- Availability: In Stock
-
$33.68
- Ex Tax: $33.68